Home Über WIMA Produkte Technische Info Muster Distribution News Kontakt Parametersuche
ImpressumPrint page
Produkte:
SMD-Kondensatoren
Kondensatoren im RM 2.5 mm 
Kondensatoren im RM 5 mm 
Film/Folien-Kondensatoren im RM 7.5 - 15 mm 
Metallisierte Kondensatoren im RM 7.5 - 37.5 mm 
Impulskondensatoren 
Funk-Entstörkondensatoren 
Snubber Kondensatoren 
GTO Kondensatoren 
DC-Link Kondensatoren 
SuperCaps 

Sie sind hier: HomeProdukteFilm/Folien-Kondensatoren im RM 7.5 - 15 mmFKS 3 Seite 1

Übersicht

 

FKS 3

 

FKP 3

 

PDF-File

 

 

Page 2
 
The values of the WIMA FKM 3 range according to the main catalogue 2009 are still available on request.
Polyester (PET) Film and Foil Capacitors
for Pulse Applications in PCM 7.5 mm to 15 mm
 
Special Features
Pulse duty construction
According to RoHS 2002/95/EC
Typical Applications
For general DC-applications e.g.
Coupling
Decoupling
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Metal foil
Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Yellow.
Electrical Data
Capacitance range:
1000 pF to 0.22 µF (E12-values on request)
Rated voltages:
100VDC, 250VDC
Capacitance tolerances:

±20%, ±10%, ±5%
Operating temperature range:
-55°C to +100°C (+125°C available subject to special enquiry)
Test specifications:
In accordance with IEC 60384-11 and EN 130100
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20°C:
> 3 x 104 M (mean value: 5 x 105 M)
Measuring voltage: 100 V/1 min.
Dissipation factors at +20°C: tan
Test voltage:
2 Ur, 2 sec
Maximum pulse rise time:
1000 V/µsec for pulses equal to the rated voltage
Voltage derating:
A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and 40°C)


Graphs:

Soldering:
at f C < 0.01 µF 0.01 µF < C < 0.22 µF
1kHz
10kHz
100kHz
< 8 x 10-3
< 15 x 10-3
<
20 x 10-3
< 8 x 10-3
< 20 x 10-3
<
25 x 10-3
 
Mechanical Tests   Packing
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29
  Available taped and reeled.

Detailed taping information:


Example for ordering / Part number:
 

 

Page 2