Sie sind hier: HomeProdukteKondensatoren im RM 2.5 mmMKS 02 Seite 1

Übersicht   FKP 02   MKS 02   PDF-File

Page 2
Metallized Polyester (PET) Capacitors in PCM 2.5 mm
Special Features High volume/capacitance ratio and reduced base PCM 2.5 mm Self-healing According to RoHS 2002/95/EC Typical Applications For general DC-applications e.g. By-pass Blocking Coupling and decoupling Timing Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Vacuum-deposited Internal construction: Encapsulation: Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire Marking: Colour: Red. Marking: Silver. Epoxy resin seal: Yellow		Electrical Data Capacitance range: 3300 pF to 1.0 µF (E12-values on request) Rated voltages: 50 VDC, 63VDC, 100VDC, 250VDC Capacitance tolerances: ±20%, ±10%, (±5% available subject to special enquiry) Operating temperature range: -55°C to +100°C (+125°C available subject to special enquiry) Test specifications: In accordance with IEC 60384-2 and EN 130400 Climatic test category: 55/100/21 in accordance with IEC Insulation resistance at +20°C: Test voltage: 1.6 Ur, 2 sec Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages. Reliability: Operational life > 300000 hours Failure rate < 2 fit (0.5 x Ur and 40°C) Graphs: Soldering: Ur Utest C < 0.33 µF 0.33 µF< C < 1.0 µF 50 VDC 10 V >3.75 x 103 M (mean value: 1x104M) > 1250 sec (Mx µF) (mean value: 3000 sec) 63 VDC 50 V >3.75 x 103 M (mean value: 1x104M) > 1250 sec (Mx µF) (mean value: 3000 sec) >100 VDC 100 V >1 x 104 M (mean value: 2x104M) - Measuring time: 1 min. Dissipation factors at +20°C: tan at f C < 0.1 µF 0.1 µF< C < 1.0 µF 1 kHz 10 kHz 100 kHz < 8 x10-3 < 15 x10-3 < 30 x10-3 < 8 x10-3 < 15 x10-3 - Maximum pulse rise time: for pulses equal to the rated voltage Capacitance pF/µF Pulse rise time V/µsec max.operation/test 3300 ...6800 0.01 ...0.022 0.033...0.068 0.1...0.33 0.47...1.0 100/1000 50/500 30/300 20/200 15/150   Mechanical Tests   Packing Pull test on pins: 10 N in direction of pins according to IEC 60068-2-21. Vibration: 6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29   Available taped and reeled. Detailed taping information. Example for ordering / Part number:
Page 2