|
You are here: Home Technical Info Application Guide
| Application Guide for WIMA Capacitors |
PDF |
| Automotive |
Fields of Application |
|
| Safety |
Auxiliaries |
Powertrain |
Features |
| Airbag control unit |
Braking system control unit
(ABS/ESC) |
Tire pressure monitoring unit |
HID lamps |
Small motor drives (e.g. seats, mirrors, windows etc.) |
Electrical power steering |
Remote keyless entry |
DC/DC converter and inverter
Electric drives |
Fuel pump, diesel filter control unit |
|
SMD Capacitors
0.01 µF - 6.8 µF
63 - 1000 VDC
Size 1812 - 6054 |
|
SMD-PPS
|
SMD-PPS
|
SMD-PET,
SMD-PPS
|
|
SMD-PET |
SMD-PET |
SMD-PET |
|
SMD-PET |

|
Operating temp. up to 140°C
|
 |
Operating life > 300.000 h |
 |
Suitable for lead-free
soldering at T < 250°C |
|
Film Capacitors
1000 pF - 220 µF
50 - 2000 VDC
PCM 2.5 - 37.5mm |
|
|
MKS,
FKS
|
MKS,
FKS
|
|
MKP |
MKS,
MKP,
FKS |
MKP |
|
MKS |
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Smallest PCM 2.5mm |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |
 |
|
|
|
MKP 10,
FKP 4,
FKP 1,
MKP |
|
|
|
MKP 10,
FKP 4,
FKP 1,
MKP |
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
Snubber Capacitors
0.01 µF - 25 µF
250 - 4000 VDC
Variable terminations |
 |
|
|
|
|
|
|
|
Snubber
MKP/FKP |
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Various contact
configurations |
|
DC-LINK Capacitors
2 µF - 4500 µF
400 - 1600 VDC
Variable terminations |
 |
|
|
|
|
|
|
|
DC-LINK |
|
|
SuperCaps
12 F - 840 F
5 - 112 VDC
(+customized) |
 |
SuperCap MC/MR modules for boardnet stabilisation and safety back-up |
SuperCap MC/MR modules for local power supply |
SuperCap MC/MR modules for recuperation of braking energy/power boost |
 |
Operating temp. -30/+65°C |
 |
Operating life > 10 years |
 |
Discharge current up to
several 1000 A |
|
| Power Electronics |
Fields of Application |
|
| Power Electronics |
Features |
| Battery charger |
Frequency
converter |
Power supply /
SMPS |
UPS |
Electronic power
meter |
|
SMD Capacitors
0.01 µF - 6.8 µF
63 - 1000 VDC
Size 1812 - 6054 |
|
SMD-PET
|
|
|
|
SMD-PET,
SMD-PPS |

|
Operating temp. up to 140°C |
 |
Operating life > 300.000 h |
 |
Suitable for lead-free
soldering at T < 250°C |
|
Film Capacitors
1000 pF - 220 µF
50 - 2000 VDC
PCM 2.5 - 37.5mm |
|
MKS, MKP,
FKS
|
|
|
|
MKS, MKP,
FKS
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Smallest PCM 2.5 mm |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |

|
|
MKP 10,
FKP 4,
FKP 1,
MKP |
MKP 10,
FKP 4,
FKP 1,
MKP |
|
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
EMI Supression Capacitors
1000 pF - 2.2 µF
250 - 500 VAC
PCM 7.5 - 27.5mm |
 |
MP 3-X1/-X2/-Y2
MKP-X2/-Y2 |
MP 3-X1/-X2/-Y2
MKP-X2/-Y2 |
MP 3-X1/-X2/-Y2
MKP-X2/-Y2 |
|
|
 |
Operating temp. up to 110°C |
 |
Operating life > 300.000 h |
 |
High reliability against active
or passive flammability (MP) |
|
Snubber Capacitors
0.01 µF - 25 µF
250 - 4000 VDC
Variable terminations |

|
|
Snubber
MKP/FKP |
Snubber
MKP/FKP |
Snubber
MKP/FKP |
|
|
DC-LINK Capacitors
2 µF - 4500 µF
400 - 1600 VDC
Variable terminations |

|
|
DC-LINK |
|
|
|
|
SuperCaps
12 F - 840 F
5 - 112 VDC
(+customized) |
 |
|
|
|
SuperCap MC/MR
modules as
emergency backup
system |
|
 |
Operating temp. -30/+65°C |
 |
Operating life > 10 years |
 |
Discharge current up to
several 1000 A |
|
| Lighting |
Fields of Application |
|
| Power Supply |
Features |
| Electronic ballasts |
Energy saving lamps |
|
Metallized Capacitors
1000 pF - 220 µF
50 - 2000 VDC
PCM 5 - 37.5mm |
|
MKP 2,
MKS 4,
MKP 4 |
MKS 2,
MKP 2,
MKS 4,
MKP 4 |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm
|
|
MKP 10,
FKP 4,
FKP 1
|
MKP 10,
FKP 4,
FKP 1 |
|
EMI Supression Capacitors
1000 pF - 2.2 µF
275 - 300 VAC
PCM 7.5 - 27.5mm
Class X2, Y2
|
|
MKP-X2,
MKP-Y2 |
MKP-X2,
MKP-Y2 |
 |
Polypropylene (PP) dielectric |
 |
High degree of interference suppression due to
good attenuation and low ESR |
 |
Self-healing properties
|
|
| Medical |
Fields of Application |
|
| Medical Equipment |
Features |
| Imaging equipment (CT, MRT, X-Ray, ultrasound) |
Anesthesia equipment |
Cleaning equipment |
Defibrillation devices |
Patient care monitoring (glucose meter, blood gas analyser, telemetry) |
Respiration technology |
|
SMD Capacitors
0.01 µF - 6.8 µF
63 - 1000 VDC
Size 1812 - 6054 |
|
|
SMD-PET,
SMD-PPS |
SMD-PET,
SMD-PPS |
|
SMD-PET,
SMD-PPS |
SMD-PET,
SMD-PPS |

|
Operating temp. up to 140°C |
 |
Operating life > 300.000 h |
 |
Suitable for lead-free
soldering at T < 250°C |
|
Film Capacitors
1000 pF - 220 µF
50 - 2000 VDC
PCM 2.5 - 37.5mm |
|
MKP |
MKS,
MKP |
MKS,
MKP |
|
MKS,
MKP |
MKS,
MKP |
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Smallest PCM 2.5 mm |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |

|
MKP 10,
FKP 4,
FKP 1 |
|
|
MKP 10,
FKP 4,
FKP 1 |
MKP 10,
FKP 4,
FKP 1 |
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
EMI Supression Capacitors
1000 pF - 1.0 µF
250 - 500 VAC
PCM 7.5 - 27.5mm |
 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
MP 3-X1,
MP 3-X2,
MP 3-Y2 |
 |
Operating temp. up to 110°C |
 |
Operating life > 300.000 h |
 |
High reliability against active
or passive flammability |
|
Snubber Capacitors
0.01 µF - 25 µF
250 - 4000 VDC
Variable terminations |

|
Snubber
MKP/FKP |
|
|
|
|
|
|
SuperCaps
100 F - 6500 F
2.5 VDC
(+customized) |
|
|
|
|
SuperCap C/R
|
|
|
 |
Operating temp. -30/+65°C |
 |
Operating life > 10 years |
 |
Discharge current up to
several 1000 A |
|
| Consumer |
Fields of Application |
|
| Consumer Electronics |
Features |
| High-end audio systems |
Amplifier |
LCD / Plasma TVs |
Set top boxes |
Video systems |
Control units for home appliances |
White goods (induction cooker, ignition units etc.) |
|
SMD Capacitors
0.01 µF - 6.8 µF
63 - 1000 VDC
Size 1812 - 6054 |
|
SMD-PPS
|
SMD-PET,
SMD-PPS |
|
|
|
SMD-PET |
SMD-PET
|

|
Operating temp. up to 140°C |
 |
Operating life > 300.000 h |
 |
Suitable for lead-free
soldering at T < 250°C |
|
Film Capacitors
27 pF - 220 µF
50 - 2000 VDC
PCM 2.5 - 37.5mm |
|
MKS,
MKP,
FKP |
MKS,
MKP,
FKP |
|
MKP |
MKS |
MKS,
MKP |
MKS,
MKP,
FKS |
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Smallest PCM 2.5 mm |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |

|
MKP 10 |
MKP 10 |
MKP 10 |
|
MKP 10,
FKP 4,
FKP 1 |
|
MKP 10,
FKP 4,
FKP 1 |
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
EMI Supression Capacitors
1000 pF - 2.2 µF
250 - 500 VAC
PCM 7.5 - 27.5mm |
 |
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
MKP-X2,
MKP-Y2 |
|
MKP-X2,
MKP-Y2 |
MKP-X2,
MKP-Y2 |
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
 |
Operating temp. up to 110°C |
 |
Operating life > 300.000 h |
 |
High reliability against active
or passive flammability (MP) |
|
Snubber Capacitors
0.01 µF - 25 µF
250 - 4000 VDC
Variable terminations |

|
|
|
|
|
|
|
Snubber
MKP/FKP |
|
| Telecom / Data |
Fields of Application |
|
| Telecommunication / Data Processing |
Features |
| Power supply |
Splitter |
Data processing systems (server etc.) |
Network devices (router, switcher, hubs, modems) |
Wireless communication (WLAN, UMTS etc.) |
Memory backup |
|
SMD Capacitors
0.01 µF - 6.8 µF
63 - 1000 VDC
Size 1812 - 6054 |
|
|
SMD-PET,
SMD-PPS |
SMD-PET,
SMD-PPS |
SMD-PET,
SMD-PPS |
SMD-PET,
SMD-PPS |
|

|
Operating temp. up to 140°C |
 |
Operating life > 300.000 h |
 |
Suitable for lead-free
soldering at T < 250°C |
|
Film Capacitors
1000 pF - 220 µF
50 - 2000 VDC
PCM 2.5 - 37.5mm |
|
|
MKS,
MKP |
MKS,
MKP,
FKS |
MKS,
MKP,
FKS |
MKS,
MKP,
FKS |
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Smallest PCM 2.5 mm |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |

|
MKP 10,
FKP 4,
FKP 1 |
|
MKP 10,
FKP 4,
FKP 1 |
MKP 10,
FKP 4,
FKP 1 |
MKP 10,
FKP 4,
FKP 1 |
|
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
EMI Supression Capacitors
1000 pF - 2.2 µF
250 - 500 VAC
PCM 7.5 - 27.5mm |
 |
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
|
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
MP 3-X1/-X2/-Y2,
MKP-X2/-Y2 |
|
|
 |
Operating temp. up to 110°C |
 |
Operating life > 300.000 h |
 |
High reliability against active
or passive flammability (MP) |
|
SuperCaps
100 F - 6500 F
2.5 VDC
(+customized) |
|
|
|
|
|
|
SuperCap C/R |
 |
Operating temp. -30/+65°C |
 |
Operating life > 10 years |
 |
Discharge current up to
several 1000 A |
|
| New Energy |
Fields of Application |
|
| New Energy |
Features |
| Energy storage in photovoltaic systems |
Converter |
Power supply |
UPS |
|
Pulse Duty Capacitors
100 pF - 15 µF
100 - 6000 VDC
PCM 7.5 - 37.5mm |

|
|
MKP 10,
FKP 4,
FKP 1,
MKP |
MKP 10,
FKP 4,
FKP 1,
MKP |
MKP 10,
FKP 4,
FKP 1,
MKP |
 |
Operating temp. up to 100°C |
 |
Operating life > 300.000 h |
 |
Highest du/dt |
|
Snubber Capacitors
0.01 µF - 25 µF
250 - 4000 VDC
Variable terminations |

|
|
Snubber
MKP/FKP |
Snubber
MKP/FKP |
Snubber
MKP/FKP |
|
GTO Capacitors
1µF - 100 µF
400 - 1600 VDC
Axial screw connection |
 |
|
GTO MKP |
GTO MKP |
GTO MKP |
|
DC-LINK Capacitors
2 µF - 4500 µF
400 - 1600 VDC
Variable terminations |

|
|
DC-LINK |
DC-LINK |
DC-LINK |
|
SuperCaps
12 F - 6500 F
2.5 - 112 VDC
(+customized) |
 |
SuperCap C/MC/R/MR
|
|
SuperCap MC/MR
(e.g pitch control in wind turbine systems) |
SuperCap MC/MR
for emergency backup systems |
 |
Operating temp. -30/+65°C |
 |
Operating life > 10 years |
 |
Discharge current up to
several 1000 A |
|
WIMA SMD Capacitors
| Fields of Application: Automotive, Power, Medical, Consumer, Telecom/Data |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
SMD-PET
SMD-PPS
|
Blocking/Coupling
High-Pass Filter:
| - |
preventing DC voltages |
| - |
transferring AC voltages |
|
 |
 |
| - |
High insulation resistance
|
| - |
Low self-inductance (to observe voltage rating) |
|
 |
Operating temperatures up to 100°C (SMD-PET) and 140°C (SMD-PPS) |
 |
Suitable for lead-free soldering at elevated processing temperature Tpeak = 250°C (SMD-PPS) |
 |
Suitable for filtering due to low dissipation factor (SMD-PPS) |
| |
| Compared to Ceramic SMD (MLCC): |
| |
 |
No internal cracks or delamination |
 |
C/C over temperature: very low (SMD-PET) or extremely low (SMD-PPS) |
 |
Self-healing capability -> high withstanding voltage, high reliability |

|
|
Bypass/Decoupling
Low-Pass Filter:
| - |
suppressing transmission of high frequencies (AC voltages) |
|
 |
 |
| - |
High insulation resistance
|
| - |
Low self-inductance |
|
Smoothing
| - |
smoothing of pulsating DC-voltages from AC-rectifier |
|
 |
 |
| - |
Comparably high capacitance
|
| - |
Low dissipation factor (to observe frequency) |
|
| SMD-PPS |
Band-Pass Filter (e.g. Audio, TV)
| - |
pass frequencies within a certain range |
| - |
attenuate frequencies outside that range |
|
 |
 |
| - |
Low dissipation factor
|
| - |
Stable capacitance |
|
Band-Stop Filter (e.g. Audio, TV)
| - |
attenuate frequencies within a specific range |
| - |
pass frequencies outside that range |
|

|
 |
| - |
Low dissipation factor
|
| - |
Stable capacitance |
|
WIMA Film Capacitors (PCM 2.5 - 37.5 mm)
| Fields of Application: Automotive, Power, Lighting, Medical, Consumer, Telecom/Data, New Energy |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
MKS 02, MKS 2,
MKS 4,
FKS 2, FKS 3
MKP 2, MKP 4
(HF-coupling/
decoupling)
|
Blocking/Coupling
High-Pass Filter:
| - |
preventing DC voltages |
| - |
transferring AC voltages |
|
 |
 |
| - |
High insulation resistance
|
| - |
Low self-inductance (to observe voltage rating) |
|
Metallized Film Capacitors (MK-Types): |
| |
 |
High capacitance values in small box sizes
|
 |
Smallest PCM: 2.5 mm (MKS 02)
|
 |
C/C over temperature: very low (MKS, MKP)
|
 |
Self-healing capability -> high withstanding voltage, high reliability
|
 |
Very low dissipation factor (MKP)
|
 |
High-frequency application (MKP) due to low dissipation factor |
| |
| Film/Foil Capacitors (FK-Types): |
| |
 |
High pulse and current rating
|
 |
Smallest PCM: 2.5 mm (FKP 02)
|
 |
C/C over temperature: very low (FKS, FKP)
|
 |
High insulation resistance (FKS) or very high insulation resistance (FKP)
|
 |
Close tolerances up to 1% (FKP)
|
 |
High-frequency application (FKP) due to very low dissipation factor
|
 |
High reliability |

|
|
Bypass/Decoupling
Low-Pass Filter:
| - |
suppressing transmission of high frequencies (AC voltages) |
|
 |
 |
| - |
High insulation resistance
|
| - |
Low self-inductance |
|
MKS 02, MKS 2,
MKS 4,
MKP 4 |
Smoothing
| - |
smoothing of pulsating DC-voltages from AC-rectifier |
|
 |
 |
| - |
Comparably high capacitance
|
| - |
Low dissipation factor (to observe frequency) |
|
FKP 02, FKP 2,
FKP 3,
MKP 2, MKP 4 |
Band-Pass Filter (e.g. Audio, TV)
| - |
pass frequencies within a certain range |
| - |
attenuate frequencies outside that range |
|
 |
 |
| - |
Low dissipation factor
|
| - |
Stable capacitance |
|
Band-Stop Filter (e.g. Audio, TV)
| - |
attenuate frequencies within a specific range |
| - |
pass frequencies outside that range |
|

|
 |
| - |
Low dissipation factor
|
| - |
Stable capacitance |
|
FKP 02, FKP 2,
FKP 3,
MKP 2, MKP 4
|
Timing (e.g. Signal Light)
| - |
when capacitor is charged voltage is increasing over time |
| - |
after passing certain value a new state change occurs |
|
 |
 |
| - |
High insulation resistance
|
| - |
Stable capacitance |
|
FKP 02, FKP 2,
FKP 3,
MKP 2, MKP 4 |
Sample and Hold (e.g. Amplifier)
Analogue-Digital Converter:
| - |
capacitor is used to store analogue voltage value |
| - |
electronic switch is used to connect/disconnect capacitor from analogue input (sampling rate) |
|
 |
 |
| - |
Low dielectric absorption
|
| - |
High insulation resistance |
|
Peak Voltage Detectors
| - |
diode conducts positive "half cycles" to charge capacitor to peak voltage |
| - |
DC "peak" is stored in the capacitor, the diode is blocking current flow |
| - |
capacitor retains the peak value even if the waveform drops to zero |
|
 |
 |
| - |
Low dielectric absorption
|
| - |
High insulation resistance |
|
WIMA Pulse Duty Capacitors (PCM 7.5 - 37.5 mm)
| Fields of Application: Automotive, Power, Lighting, Medical, Consumer, Telecom/Data, New Energy |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
MKP 10,
FKP 4,
FKP 1
|
Fly-Back (e.g. Monitor, TV)
| - |
current flows from deflection coil to fly-back capacitor |
| - |
electron beam is rapidly shifted from right to left side of screen |
|
 |
 |
| - |
Low dissipation factor
|
| - |
High pulse rise time
|
| - |
High dielectric strength |
|
 |
Pulse and current rating: high (MKP 10), very high (FKP 4) or extremely high (FKP 1)
|
 |
Self-healing capability -> high withstanding voltage, outstanding reliability
|
 |
Very low dissipation factor
|
 |
High insulation resistance |

|
|
MKP 10,
(MKP 4) |
S-Correction (Smoothing)
| - |
current flows from CL through trafo deflection coils to Cs |
| - |
Cs is smoothing pulsating DC-voltages |
|
 |
 |
| - |
Low dissipation factor
|
| - |
Good pulse rise time |
|
MKP 10,
FKP 4,
FKP 1 |
Energy Storage (e.g. Ballasts)
| - |
capacitor is charged to a high voltage, stores the energy and then releases it in short time |
|
 |
 |
| - |
High pulse rise time
|
| - |
High (surge) current carrying capacity
|
| - |
High insulation resistance |
|
MKP 10,
FKP 4,
FKP 1 |
Oscillating Circuit
Resonant system (LC):
| - |
AC voltage oscillates at resonant frequency |
| - |
see also filter applications |
|
 |
 |
| - |
Low dissipation factor
|
| - |
Stable capacitance (please refer to technical data) |
|
MKP 10,
FKP 4,
FKP 1
(FKP 02, FKP 2,
FKP 3) |
Snubbing (e.g. Relay)
| - |
capacitor attenuates over-voltage peaks by high current switching |
|
 |
 |
| - |
Low dissipation factor
|
| - |
High pulse rise time (please refer to technical data) |
|
WIMA EMI Suppression Capacitors
| Fields of Application: Automotive, Power, Lighting, Medical, Consumer, Telecom/Data, New Energy |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
MKP-X2,
MKP-Y2,
MP 3-X2,
MP 3-X1,
MP 3-Y2,
MP 3R-Y2
|
EMI Suppression
| - |
capacitor suppress high-frequency disturbances of electrical equipment on the mains |
| - |
Class X capacitors are connected between phase and neutral or phase and phase conductors |
| - |
Class Y capacitors are connected between phase conductors and earthed casing and thus by-pass operating insulation |
|
 |
 |
| - |
Particular high reliability against active and passive flammability
|
|
 |
High reliability against active and passive flammability (MP 3-X2, MP 3-X1, MP 3-Y2,
MP 3R-Y2)
|
 |
High degree of interference suppression due to good attenuation and low ESR
|
 |
High volume/capacitance ratio (MKP-X2,
MKP-X2 R, MKP-Y2)
|

|
|
MKP-X2,
MKP-X2 R,
(MP 3-X1),
(MKS 4)
(> 630 VDC,
> PCM 10) |
Voltage Dropper
| - |
capacitor voltage divider |
|
 |
 |
| - |
High capacitance stability
|
| - |
Flame retardant (please check if approvals are required) |
|
WIMA Snubber Capacitors
| Fields of Application: Power, Medical, Consumer, New Energy |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
|
Snubber MKP,
Snubber FKP
|
Energy Storage
| - |
capacitor is charged to a high voltage, stores the energy and releases it in short time |
|
 |
 |
| - |
High pulse rise time
|
| - |
High (surge) current carrying capacity
|
| - |
High insulation resistance
|
|
|
|
Snubber MKP,
Snubber FKP
|
Snubbing (e.g. IGBT)
| - |
capacitor attenuates over-voltage peaks by high current switching |
|
 |
 |
| - |
Low dissipation factor
|
| - |
High pulse rise time (please refer to technical data)
|
| - |
Low self-inductivity |
|
WIMA GTO Capacitors
| Fields of Application: Power, New Energy |
| Product Type |
Application Function |
Circuit Application |
Waveform |
Requirements |
Special Characteristics |
GTO MKP
|
Energy Storage
| - |
capacitor is charged to a high voltage, stores the energy and releases it in short time |
|
 |
 |
| - |
High pulse rise time
|
| - |
High (surge) current carrying capacity
|
| - |
High insulation resistance
|
|
|
GTO MKP
|
Snubbing (e.g. GTO-Thyristor)
| - |
capacitor attenuates over-voltage peaks by high current switching |
|
 |
 |
| - |
Low dissipation factor
|
| - |
High pulse rise time (please refer to technical data)
|
| - |
Low self-inductivity |
|
WIMA DC-LINK Capacitors
| Fields of Application: Power, New Energy |
| Product Type |
Application Function |
Requirements |
Special Characteristics |
|
DC-LINK MKP 4
DC-LINK MKP 5
DC-LINK MKP 6
DC-LINK HC |
Energy Buffer (e.g. Converter)
| - |
capacitor stores DC voltage in an intermediate circuit |
| - |
high frequency ripple voltage generated by inverter is short-circuited |
|
| - |
High volume/capacitance ratio
|
| - |
High DC-voltage strength
|
| - |
Low dissipation factor
|
|
|
| Circuit Application |
 |
|
WIMA SuperCaps - Automotive
| Fields of Application: Automotive (Passenger Cars, Trucks, Busses, Military Vehicles and Forklifts) |
| Product Type |
Application Function |
Figure |
Requirements |
Special Characteristics |
SuperCap MC/MR
"customized" |
Recuperation of Braking Energy/Power Boost
| - |
SuperCap unit stores energy generated by braking and releases it within short time for acceleration |
Peak-Load Levelling
| - |
SuperCap unit supports battery by covering power-peaks |
Local Power Supply
| - |
SuperCap unit supplies local electric systems which need peak-power within short time |
Boardnet Stabilisation
| - |
Safety backup for security relevant on-board electronic systems |
|
Combination with Batteries in Hybrid and Electric Cars

|
- Engine starting
- Start-stop
- Electric heating
- Electric steering |
|
- Electronic
stability control
- 4-weehl steering
- Electric brakes |
|
- Electric fan
- Electric water pump
- Audio system
- Door close/lock |

|
|
| - |
Low fuel consumption
|
| - |
Low CO2 emission
|
| - |
High dynamic
|
| - |
Low weight of battery |
| - |
High efficiency |
| - |
Long life-time of battery |
| - |
High reliability of on-board electronics |
|
 |
Fast supply of several 100 A up to 3000 A in direct current operation
|
 |
Operating temperature range from -30°C to +65°C
|
 |
Many years of maintenance-free operation with clearly more than 500.000 charge/discharge cycles
|
 |
Life expectancy of more than 15 years
|
 |
Low weight as against batteries or secondary batteries
|
 |
Environmentally friendly materials |

|
|
SuperCap MC/MR
MC 110/14,
MC 200/14,
"customized" |
Cranking of Engines
| - |
SuperCap unit supplies peak-power within a short time to crank an engine |
| - |
After cranking the engine the SuperCap unit gets charged immediately |
|
Replacement of Starter Batteries
|
| - |
Power supply under extreme weather conditions (-30°C)
|
| - |
Long de-energized periods (vintage cars)
|
| - |
Low maintenance cost |
|
WIMA SuperCaps - Transportation
| Fields of Application: Transportation (Tram, Subway, Train) |
| Product Type |
Application Function |
Figure |
Requirements |
Special Characteristics |
SuperCap MC/MR
"customized" |
Recuperation of Braking Energy/Power Boost
| - |
SuperCap unit stores energy generated by braking and releases it within short time for acceleration |
Peak-Load Levelling
| - |
Coverage of power-peaks |
Short-Term Energy Storage
| - |
Network support in local traffic systems by energy storage |
|
"Rolling Stock"  |


|
| - |
Integrated heat sink |
| - |
Saving of approx. 30% of energy by recupreation |
| - |
Efficiency >95% |
|
|
| - |
Energy saving |
| - |
High dynamic |
| - |
High efficiency |
| - |
Peak-power supply |
| - |
Reduction of overhead contact lines in historic cities |
|
 |
Fast supply of several 100 A up to 3000 A in direct current operation
|
 |
Operating temperature range from -30°C to +65°C
|
 |
Many years of maintenance-free operation with clearly more than 500.000 charge/discharge cycles
|
 |
Life expectancy of more than 15 years
|
 |
Low weight as against batteries or secondary batteries
|
 |
Environmentally friendly materials |

|
|
SuperCap MC/MR
"customized" |
Motor Start
| - |
SuperCap unit supplies peak-power within a short time to crank an engine |
|
Replacement of Starter Batteries
(e.g. diesel-electric engines) |
 |
Saving:
| - |
approx. 90% of weight |
| - |
approx. 25% of fuel |
|
 |
|
| - |
Power supply under extreme weather conditions (-30°C) |
| - |
Low weight |
| - |
Low fuel consumption |
| - |
Low maintenance cost |
|
WIMA SuperCaps - Power Supply (UPS); Telecom/Data
| Fields of Application: Power Supply (UPS); Telecom/Data (Memory Backup) |
| Product Type |
Application Function |
Figure |
Requirements |
Special Characteristics |
SuperCap MC/MR
"customized" |
UPS
| - |
Short-term power supply when mains power failure |
Peak-Load Levelling
| - |
Coverage of power-peaks |
|
UPS-Emergency Backup in Hospitals, Telecommunication Systems, Oil and Gas Extraction
(cost-intensive processes)
- Micro-turbine start bridging
|
| - |
Emergency backup to avoid downtime after short blackout |
| - |
Peak-power supply |
| - |
Long life-time |
| - |
Low maintenance cost |
|
 |
Fast supply of several 100 A up to 3000 A in direct current operation
|
 |
Operating temperature range from -30°C to +65°C
|
 |
Many years of maintenance-free operation with clearly more than 500.000 charge/discharge cycles
|
 |
Life expectancy of more than 15 years
|
 |
Low weight as against batteries or secondary batteries
|
 |
Environmentally friendly materials |

|
|
SuperCap C/R
|
Short-Term Energy Storage
| - |
SuperCap unit stores energy for a short time e.g. after voltage drop |
|
Memory Backup - On-Board Logic

| - |
Transferring data from DDR memory to flash card
|
Memory Backup - Time Switch
|
| |
|
 |
 |
| |
|
| - |
Protection of clock information after voltage drop |
|
| - |
Memory backup for seconds/minutes |
| - |
Low weight |
| - |
Low maintenance cost |
|
WIMA SuperCaps - New Energy
| Fields of Application: New Energy (Wind, Solar Systems) |
| Product Type |
Application Function |
Figure |
Requirements |
Special Characteristics |
SuperCap MC/MR
"customized" |
Power Supply
| - |
SuperCap unit supplies local electric systems which need power within short time |
|
Pitch Drive of Windmills  |

|
| - |
Continuous adjustment of rotor blade angle |
| - |
Pitch control functionally independent of line voltage |
| - |
Emergency stop at blackout |
|
|
| - |
Power supply under extreme weather conditions (-30°C) |
| - |
Emergency switch-off system |
| - |
Life-time for 20 years |
| - |
Low weight |
| - |
Low maintenance cost |
|
 |
Fast supply of several 100 A up to 3000 A in direct current operation
|
 |
Operating temperature range from -30°C to +65°C
|
 |
Many years of maintenance-free operation with clearly more than 500.000 charge/discharge cycles
|
 |
Life expectancy of more than 15 years
|
 |
Low weight as against batteries or secondary batteries
|
 |
Environmentally friendly materials |

|
|
SuperCap C/R
MC/MR
"customized" |
Short-Term Energy Storage
| - |
Intermediate storage of peak-voltage to provide continued power |
|
Short-Term Energy Buffer in Solar Systems |
 |
| |
 |
|
| - |
Energy buffer to avoid downtime after short blackout |
| - |
Power supply under extreme weather conditions (-30°C) |
| - |
Life-time for 20 years |
| - |
Low weight |
| - |
Low maintenance cost |
|
|