Metallized Polyphenylene-Sulphide (PPS) Capacitors in PCM 5 mm
Special
Features
Operating temperature up to +140°C Self-healing
Low dissipation factor
Low dielectric absorption Very constant capacitance value versus temperature According to RoHS 2002/95/EC
Typical
Applications
For
general applications in high temperature circuits e.g. By-pass Blocking
Coupling and decoupling
Timing
Filtering
Oscillating circuits
Construction
Dielectric:
Polyphenylene-sulphide (PPS) film Capacitor electrodes: Vacuum-deposited Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0 Terminations:
Tinned wire Marking:
Colour: Red. Marking: White. Epoxy resin seal:
Red.
Electrical Data
Capacitance
range: 0.01 µF to 1.0 µF
(E12-values on request)
Rated voltages: 63VDC, 100VDC, 250VDC, 400VDC
Capacitance tolerances: ±20%, ±10% (±5% available subject to special enquiry)
Operating temperature range: -55°C to +140°C Climatic test category: 55/140/56 in accordance with IEC
Insulation resistance at +20°C:
Test
voltage: 1.6 Ur, 2 sec
Voltage derating:
A voltage derating factor of 0.75% per K
must be applied from +125°C for DC
voltages and from +110°C for AC voltages. Reliability: Operational life > 300000
hours
Failure rate < 2 fit (0.5 x Ur and
40°C) Graphs: / Soldering:
Ur
Utest
C < 0.33 µF
0.33 µF< C < 1.0 µF
63 VDC
50 V
>1 x 104 M
(mean value: 5x104M)
> 3000 sec (Mx µF)
(mean value: 6000 sec)
>100 VDC
100 V
>1 x 104 M
(mean value: 5x104M)
-
Measuring
time: 1 min. Dissipation factors at +20°C:
tan
at f
C < 0.1
µF
0.1 µF< C < 1.0 µF
1 kHz
10 kHz
100 kHz
< 15 x10-4 < 20 x10-4
< 50 x10-4
< 20 x10-4 < 25 x10-4
-
Maximum
pulse rise time: for pulses equal to the
rated voltage
Capacitance
µF
Pulse rise time
V/µsec
max.operation/test
63VDC
100VDC
250VDC
400VDC
0.01 ...0.022
0.033...0.068
0.1...0.47
0.68...1.0
-
-
15/150
12/120
-
-
15/150
12/120
50/500
40/400
40/400
-
60/600
50/500
-
Mechanical
Tests
Packing
Pull
test on leads: 10 N in direction of leads according to
IEC 60068-2-21 Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6 Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29
Operating temperature up to +140°C
temperature 
